Skip to main content
Version: 11.x

Microsoft Teams Rooms

Smartsign Screensaver can show your Smartsign content on the meeting room display when the room is not in use. When a meeting is about to start, or someone uses the room, Teams takes the screen back automatically.

Device requirements​

Teams Rooms on Windows: Version 5.1 or later installed on device
Teams Rooms on Android: Version 1449/1.0.96.2026087210 or later installed on device
(Microsoft does not support Signage on Cisco Android devices yet)

Before you start​

  • Microsoft license: a Teams Rooms Pro license on each room's resource account.
  • Smartsign license: one Smartsign Screensaver license per room.
  • Admin access:
    • A Teams Rooms Pro Manager or Global Admin account for the Teams Rooms Pro Management portal.
    • A Smartsign user who is allowed to register screens.
  • Network: the room device must be able to reach Smartsign's cloud over HTTPS.

Tested devices​

Works with Smartsign

  • Yealink MeetingBoard Pro

Other devices are expected to perform the same, but have not been verified independently.

Step 1: Turn on digital signage​

  1. Sign in to the Teams Rooms Pro Management portal.
  2. Go to Settings > Digital signage and turn on Digital signage.

Step 2: Add Smartsign as a source​

  1. On the Digital signage tenant management page, select Add source.
  2. Enter a name, for example "Smartsign", and a description. Select Next.
  3. Select Custom and enter the URL for your Smartsign service:
  4. Accept the terms of use, select Next, review and select Submit.

All rooms use the same URL. Each room gets its own identity the first time it loads.

Step 3: Assign the source to your rooms​

  1. On the tenant management page, select the Smartsign source and choose Assign to devices.
  2. Review the settings and select Next.
  3. Select the rooms or device groups that should show the screensaver. Select Next.
  4. Choose Apply now or the maintenance window, then select Submit.

To set up a single room instead, go to Rooms > [room] > Settings > Digital signage. Turn it on, choose the Smartsign source, select Apply, then select Submit.

Step 4: Register each room in Smartsign Publisher​

  1. Leave the room idle until the screensaver starts. By default this takes 1 minute. The display shows a six-character registration code.
  2. Sign in to Smartsign Publisher (eu.smartsigncloud.com or au.smartsigncloud.com) and choose the correct site.
  3. Go to Screens > Register screen.
  4. Enter a name that identifies the room, for example "Stockholm – Room Orion".
  5. Enter the registration code and choose Check.
  6. Choose the screen folder and select Register screen.

The room is now a screen in Publisher. Publish content to it as you would to any other Smartsign screen. Check the screen's active time: the default is Monday–Friday, 08:00–17:00, and the screensaver shows no content outside it.

Step 5: Adjust timing (optional)​

These settings are under Settings > Preferences on the tenant management page:

SettingDefaultRecommendation
Activation timer1 minHow long the room must be idle before the screensaver starts.
Deactivation timer for front-of-room displays0 minSet it to a few minutes so the screensaver stops before a scheduled meeting starts.
Show Teams info banner—If this is on, the top 15% of the screen shows the room name and calendar. Keep important content out of that area.

Good to know​

  • Timing of changes: configuration changes reach the room when it is online and not in use. If the room is busy, the change waits for the maintenance window. After a restart, the device can take 10–15 minutes to reconnect.
  • When it shows: the screensaver only runs when the room is idle. Teams decides when it starts and stops.
  • Video: video support and quality are limited by the room hardware. Videos larger than 300 MB are skipped. Images and simple animations work best.
  • Sleep mode: some Android devices don't go into sleep mode once digital signage is turned on. Microsoft has no workaround yet.
  • Exiting: touching the screen returns the room to Teams.

Troubleshooting​

  • No registration code or content appears:
    • Check that the room has a Teams Rooms Pro license and is online.
    • Check that the Smartsign source is assigned to the room.
    • Check that the room has been idle longer than the activation timer.
  • The room is registered but stays on the Teams home screen: check that content is published to the screen and that the current time is within the screen's active time.
  • A room shows a registration code again: the device has lost its Smartsign identity, for example after a factory reset. Register it again and remove the old screen in Publisher.
  • Need help? Contact support@smartsign.se.